Effects of meteorological conditions on PM10 concentrations - A study in Macau

Review on the annual PM₁₀ concentrations over a 10-year period shows that Macau is subjected to severe fine particulate pollution. Investigations of its variation in monthly and daily time scales with the local meteorological records reveal further details. It is found that a distinct feature of the Asian monsoon climates, the changes of wind direction, mainly controls the general trend of PM₁₀ concentration in a year. The monsoon driven winter north-easterly winds bring upon Macau dry and particle enriched air masses leading to a higher concentration in that period while the summer south-westerly winds transport humid and cleaner air to the region leading to a lower PM₁₀ value. This distinct seasonal feature is further enhanced by the lower rainfall volume and frequency as well as mixing height in winter and their higher counterparts in summer. It is also found that the development of tropical cyclones near Macau could also impose episode like PM₁₀ concentration spikes due to the pre-typhoon induced stagnant air motion followed by the swing of wind direction to the northerly.     

旋风除尘设备质量现存问题剖析

论述了旋风除尘设备在产品生产过程呼使用中存在的问题，分析了现存问题的原因，提出了提高旋风除尘设备产品质量及使用效果的对策措施。     

Mitigation of the Impact of Tropical Cyclones in Northern Australia through Community Capacity Enhancement

Community mitigation of hazard impact requires hazard knowledge and preparedness on the part of the members of diverse and complex communities. Longitudinal research in the tropical cyclone prone north of Australia has gathered extensive datasets on community awareness, preparedness and knowledge, in order to contribute to education campaigns and mitigation strategies. Data have been used to identify issues of vulnerability to cyclones and capacity to deal with the hazard. This has been developed as a community vulnerability and capacity model that may be applied to diverse communities in order to assess levels of capability to mitigate and deal with the cyclone hazard. The model is presented here in a simplified form as its development is evolving and ongoing.     

旋流器在船舶舱底含油污水分离中的应用

分析了船舶舱底含油污水的特性，讨论了船舶油水分离器的现状及使用中存在的问题，提出了使用旋流器对船舶舱底含油污水进行预处理，以改善进入船舶油水分离器的水质及减轻管理人员负担。     

青岛地区边界层特征及酸雨成因

青岛地区边界层风场与温度场垂直分布很特殊，在１５００ｍ高度以下风场，近地面层风速较小，３００—４００ｍ高度风速较大，５００ｍ以上风速减小，１０００ｍ以上又逐渐增大．温度层结早晚稳定，午后２００ｍ以下不稳定，混合层不高，一般在４００ｍ左右，有时可达７００ｍ，低空经常出现多层逆温．冬季盛行偏北风，夏季盛行偏南风，并经常受江淮气旋和黄淮气旋影响，气旋经过青岛地区时，流场经常出现上、下辐合气流．引入平直和上、下切变两种气流，应用平流扩散方程，对青岛地区连续点源所排放的污染物作模式计算，结果表明，在单一平直气流时，污染物传输较远，但浓度轴线也在一定距离上与地面相交．尤其是在雨天，污染物只在局地散布，浓度较大．当风向出现上、下层切变时，污染物传输范围受限制，这些污染物质在雨天经过化学变化即在近距离形成酸雨．     

浓缩型入口下排气旋风分离器流场和性能的数值计算

运用CFD方法,对浓缩型入口下排气旋风分离器内的气固两相流动进行了研究。计算中气相采用RNGk-ε湍流模型,颗粒相采用拉格朗日坐标系下的离散相模型。重点计算了分离器流场、分离效率及其阻力特性,结果表明,采用浓缩入口后分离器内流场发生明显改变,分离器上部切向速度明显提高,有利于大颗粒的分离。同时通过对不同浓缩结构旋风分离器的分离效率和阻力特性进行分析比较,为工程设计提供了依据。     

连续式磁性颗粒去除器在轧钢废水处理中的应用

连续式磁性颗粒去除器，是利用稀土永磁Ｎｄ－Ｆｅ－Ｂ为材质，处理含磁性颗粒废水的装置，其主要结构由动力传递，磁块组合体，磁条移动，设备本体，进出口流道及分离部件等组成，该文阐述了永磁分离机理，并通过磁性悬浮颗粒的理论驱进速度和最小捕获粒径的求解，探讨了提高砒生粒去除器捕 方法，实践证明，该装置用于冶金轧钢废水处理中，能代替传统的轧钢废水三级处理工艺，节约投资成本７０％，占地减少８５％，运行费用亦大幅     

磁选柱在矿山磁选尾矿和硫铁矿烧渣处理中的应用

介绍了磁选柱的结构、分选原理、分选过程及其在处理矿山磁选尾矿和硫铁矿烧渣方面的应用。用磁选柱精选磁铁矿尾矿，得到的精矿品位大于66％；用磁选柱精选硫铁矿烧渣，得到的精矿品位大于65％。硫的质量分数降至0．84％。     

污泥淤砂分离器再分离底流污泥

研究了污泥淤砂分离器对分离原污泥所得的底流污泥进行再分离时,分离分流污泥的性质。实验结果表明,原污泥MLVSS/MLSS为0.372,1次分离后得到的底流污泥MLVSS/MLSS为0.222,2次分离后得到的底流污泥MLVSS/MLSS为0.126,表明通过底流污泥再分离,能够进一步降低底流污泥中生物有机质的含量,提高底流污泥中无机淤砂的含量。同时,原污泥CST为2.85(s·L)/g SS,1次分离后得到的底流污泥CST为0.98(s·L)/g SS,2次分离后得到的底流污泥CST为0.12(s·L)/g SS,表明底流污泥再分离进一步提高了底流污泥的脱水性能,最终得到的底流污泥脱水性能良好。     

Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.